i3200 PRINTHEAD

Epson i3200 Printhead

Achieve high-resolution, production-ready output with the Epson i3200 Printhead—a PrecisionCore MicroTFP printhead widely used in professional DTF, sublimation, UV and eco-solvent printing systems. It is designed to deliver detailed graphics, smooth gradients and reliable CMYK plus white-ink performance when installed in a fully compatible printer and maintained correctly.

The i3200 is available in different versions for different ink systems, including i3200-A1 for water-based inks such as DTF and sublimation, i3200-U1 for UV inks, and i3200-E1 for eco-solvent inks. These versions may look similar, but they are not interchangeable without proper system cleaning, configuration and technical setup.epson+2

High-density printing performance

The Epson i3200 series features a 1.33-inch effective print width and 3,200 nozzles arranged in eight rows. It supports nozzle resolutions of 300 npi per row and 600 npi across two rows, providing a strong balance of image quality, speed and production reliability.inkjet-solution.epson+1

In a DTF workflow, the i3200-A1 lays down CMYK and white ink onto DTF PET film. The printed design is then coated with DTF adhesive powder, cured and heat-pressed onto suitable fabric. A correctly matched printhead helps maintain clean edges, accurate colour output and dependable white-ink performance.

Choose the correct i3200 version

Do not purchase an i3200 printhead based on appearance alone. Confirm the exact version required by your printer:

VersionTypical ink typeTypical applicationi3200-A1Water-based inkDTF, DTG and sublimation printersi3200-U1UV-curable inkUV DTF, UV roll and UV flatbed printersi3200-E1Eco-solvent inkEco-solvent and outdoor signage printers

Water-based i3200-A1 heads must not be installed in UV or solvent printers, and UV i3200-U1 heads must not be installed in DTF or sublimation printers. Switching versions requires a complete ink-system clean or replacement and reconfiguration of printer settings.dtflinko+1

Suitable applications

Use the correct i3200 printhead version in compatible printing systems for:

• DTF apparel printing on DTF PET film.

• Sublimation printing for suitable polyester-based products.

• UV DTF printing for hard-surface stickers and transfers.

• UV roll or flatbed printing, where the printer uses i3200-U1 heads.

• Eco-solvent signage and large-format printing, where the printer uses i3200-E1 heads.

• Replacement of a faulty or damaged i3200-compatible printhead.

Kenyan suppliers list DTF machines configured with multiple i3200 printheads, including a 60 cm DTF printer with four i3200 heads. This confirms common use in DTF systems, but it does not guarantee compatibility with every printer model.yiggo

Important compatibility checks

Printheads are sensitive components, and an incorrect replacement can cause poor print quality, ink-system faults or permanent damage. Before ordering, confirm:

• The exact printer brand, model and board version.

• The required i3200 version: A1, U1, E1 or another variant.

• The ink type used in your printer.

• The number of printheads required.

• The required cables, dampers, capping station and carriage compatibility.

• Whether the product is original, OEM or compatible.

• Warranty terms and whether installation or technical support is included.

A supplier should confirm compatibility in writing before you purchase, especially if you are replacing a printhead or changing from one ink system to another.dtflinko+1

Maintenance and handling

Handle the printhead carefully and avoid touching the nozzle plate or electrical contacts. Use only the cleaning solution and procedures approved for your printer and ink system. Regular nozzle checks, proper capping and correct white-ink circulation help reduce the risk of clogging and maintain print quality.

If nozzles become blocked, begin with the printer’s standard cleaning cycle and nozzle check. Avoid aggressive cleaning methods unless recommended by the printer manufacturer, as improper handling can damage the printhead.dtflinko+1

Product summary

The Epson i3200 Printhead is a high-density PrecisionCore printhead for compatible DTF, sublimation, UV and eco-solvent printers. Choose the correct A1, U1 or E1 version for your ink system, and confirm full printer compatibility before installation. Proper maintenance and correct ink handling are essential for reliable performance.