60CM DTF PET FILM

60cm DTF PET Film

Print larger custom graphics and produce more designs per roll with 60cm DTF PET Film—a coated polyester transfer film for Direct-to-Film (DTF) printing. It carries DTF-printed designs through adhesive-powder application, curing and heat-press transfer onto suitable fabrics, making it a key consumable for apparel printing and branding businesses in Kenya.

With a 60 cm roll width, this film offers more working space than a 30 cm roll. It is useful for larger designs, multiple graphics arranged across the roll, and higher-volume apparel production, subject to your printer’s width and workflow. A Kenya-based listing describes a typical 60 cm × 100 m roll, while other listings specify a 75-micron thickness and hot- or cold-peel characteristics.winnerjet+1

How DTF PET film works

DTF PET film is the carrier film in the DTF process. The design is printed onto the coated side using DTF pigment inks, adhesive powder is applied to the wet print and cured, then the film is heat-pressed onto a suitable fabric. After pressing, the film is peeled away according to its specified peel method, leaving the design on the garment.

DTF films may be supplied as single-sided or double-sided coated rolls, with hot-peel, warm-peel or cold-peel characteristics. The exact peel type, coating and recommended heat-press settings vary by product, so follow the supplier’s instructions.winnerjet+1

Suitable applications

Use 60cm DTF PET film with a compatible DTF printer and heat press to produce custom graphics for:

• T-shirts, hoodies, sweatshirts and other apparel.

• Sports jerseys, team wear and promotional shirts.

• Workwear, uniforms and branded clothing.

• Tote bags, canvas items, aprons and fabric accessories.

• Larger graphics, back prints and multiple smaller designs arranged across the roll.

DTF film is commonly used with fabrics such as cotton, polyester, cotton-polyester blends, canvas and denim. Always test the film, ink, adhesive powder and fabric combination before starting a full production run.gzhaoyin+1

Designed for higher-volume DTF production

A 60 cm × 100 m roll can support businesses producing custom apparel in larger quantities. Depending on the design size and layout, one 60 cm × 100 m roll may produce several hundred A4-sized garment transfers, though actual output depends on your design dimensions, spacing and printer setup.gzhaoyin

The wider format can reduce the need to reposition smaller designs and may help you make better use of each roll. Use a printer, powder shaker or curing system and heat press that are compatible with the roll width and your production workflow.

A practical consumable for Kenyan apparel businesses

For Kenyan print and branding businesses, 60cm DTF PET film can help support custom T-shirts, corporate wear, event apparel and small-batch garment orders. It can be used to print designs as needed for individual customers or batch production, subject to your printer’s capabilities and production setup.

Confirm these details before ordering

DTF films vary in coating, peel method and heat-press requirements. Before purchasing, ask the seller to confirm:

• Roll width and length, such as whether it is 60 cm × 100 m.

• Whether the film is single-sided or double-sided coated.

• Whether it is hot peel, cold peel or warm peel.

• Recommended DTF ink type and printer compatibility.

• Recommended adhesive powder and curing settings.

• Recommended heat-press temperature, time and pressure.

• Film thickness, core size and storage requirements.

• Whether the film is suitable for the fabrics you plan to decorate.

Some 60 cm DTF film listings give transfer ranges of approximately 130–160°C for 8–15 seconds, but these are starting points for testing rather than fixed settings. Transfer results depend on the film, powder, ink, fabric and heat press.gzhaoyin+2

Product summary

60cm DTF PET Film is a coated polyester transfer film for DTF printing workflows. It is used to carry printed designs through adhesive-powder application, curing and heat-press transfer onto suitable fabrics. Confirm the film’s peel type, coating, size and compatibility with your printer, ink and adhesive powder before ordering.